Mitel IP Phone headset accessories – Mitel compatible headset leads -switches and adaptors etc including: Converters
Handset Switch Boxes, Ear Cushions, Amplifiers, Spare Parts, Bottom leads (wired), Mitel remote answer Lifters, Buddy switches & headset training Splitter Cables and Mitel headset training packages.
Showing 1–9 of 18 results
These spare ear cushions fit the ProV and ProVX range of Streamline Pro series headsets.
If you are looking for spare leatherette ear cushions for Plantronics/Streamline ProV and ProVX headset ranges. (6 per pack) These leather look ear protectors are well made and very comfortable on the ear when wearing headsets during the working day.
Compatible alternative to the Plantronics and Streamline Pro smart lead will work on 95% of desk phones. The smart lead/cable has 8 settings which can be switched to enable use on a telephone with a standard RJ45 headset square plug. This is an ideal product if you are thinking of swapping out your phone system for another which would normally require a different headset lead for each phone brand. This smart lead will work on most RJ45 models of phone.
Please note this smart lead is not compatible with 2.5mm, 3.5mm round pin connections and USB connections (only square type RJ45) if you are unsure then please call us on 0800 644 0424
Economic way to connect 2 headsets for training and quality control purposes
RJ11 compatible headset doubler allows two headsets with RJ11 plugs to share 1 bottom lead for training purposes. Please note, this product will work on any headset which uses a RJ11 style square plug.
Please note this basic doubler does not allow the muting of each headset – see product: Headset Doubler Training dual plug if you require a mute switch
If you are unsure as to compatibility, please telephone us before ordering on 0161 830 6818.
This RJ11 to RJ11 is a simple adapter for connecting RJ11 plugs to each other
Compatible alternative to the Plantronics U10-P (U10P) headset lead or cable is the standard and most commonly used of all Plantronics headset leads and Streamline Pro headsets with a QD (quick disconnect plug)
The U10-P (U10P) is compatible with most IP, digital and analogue phones with a RJ45 headset port but please check with us on 0800 644 0424 if you are unsure as to the correct Plantronics or Streamline lead to use.
This headset bottom lead is compatible with all Sennhesier headsets with a QD (quick disconnect plug)
A simple to use handset – headset switch with mini amplifier and separate volume control which allows you to flick between using your headset and using your phone without having to remove the headset.
Ideal for telephones which do not have a dedicated headset port (jack) and headsets where an amplifier is recommended or where the volume appears to be too low. This mini amplifier can increase the volume going through the headset to improve the quality of the call.
This Biway switch will work on any Streamline Pro series headset, Plantronics regardless of the bottom lead and on any headset lead with a square pin jack (RJ45, RJ9 etc)
Headset adaptor or “Headset buddy” allows two headsets with RJ11 plugs to share 1 bottom lead for training purposes. Please note, this product will work on any headset which uses an RJ11 plug, e.g. Cisco, Avaya, Nortel etc. If you are unsure as to compatibility, please telephone us before ordering on 0161 830 6818
This product is a headset training cable or lead known as a Y lead for training purposes.
The Y lead is the ideal way to connect 2 headset tops together for training purposes on desk phones or PC, this is ideal for a trainer to sit next to the telephone agent who is receiving the training and have a choice of either listening in to or joining in on the conversation with a caller and trainee. Watch the video at the bottom of the main product page here to see how a headset training lead works
Headset training leads or Y leads are available for Plantronics, Jabra, Sennheiser, Streamline Pro,Agent & PC (computer softphone) plus all other brands!
Simply choose your current headset manufacturer from the options below and we will send you the correct Y training lead
IMPORTANT – this training lead is ONLY for use on headsets with a QD or “quick disconnect” plug half way down the wire. If your current headsets do NOT have this then simply purchase a complete headset training kit
If you are looking for a complete headset training package i.e. 2 headsets with a Y training lead then click here